background image

2

3.  Under abusive conditions, liquid may be ejected from 

the battery; avoid contact. If contact accidentally 

occurs, flush with water. If liquid contacts eyes, 

additionally seek medical help – 

Liquid ejected from the 

battery may cause irritation or burns.

Service

1.  If your power tool requires service, contact an 

authorized Snow Joe

®

 + Sun Joe

®

 dealer or call the 

Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563).

 Only identical 

replacement parts should be utilized for repairs. This will 

ensure that the safety of the power tool is maintained.

2.  If the battery charger cable is damaged, it must be 

immediately replaced to avoid a hazard.

 Contact 

the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563) for assistance.

3. Accessories:

 The use of accessories or attachment 

 

other than those recommended in this manual might 

present a hazard. 

4. 

When servicing, only use the identical replacement parts. 

Safety Rules for Cordless 

Paint Sprayer

m

CAUTION!

 DANGER OF INJURY!

 Never point the 

spray gun to yourself or other person or pets. 

1. 

Only coating material such as paint, 

enamels

, varnishes, 

etc, with a flash point of 73.5ºF (23ºC)

 and above can be 

sprayed without any additional warming. 

2. 

This device may not be suitable for working in locations 

which are covered by the explosion protection regulations. 

3. 

When spraying, make sure there's no source of ignition, 

like open fire, cigarrettes, cigars, pipes, sparking, glowing 

wires, hot surfaces, etc. in the area. 

4. 

Wear breathing protection when spraying. 

5. 

Inside and outside care must be taken to make sure that 

no solvent vapors can be sucked into the device. 

6. 

When working outdoors, consider the effect of wind, 

which will affect the direction of the spray. 

7. 

When working indoors, make sure there will be 

 

sufficient ventilation. 

8. 

Do not spray at the device. 

9. 

Do not let children play with this device. Keep it out of 

reach of children.  

10. 

Do not use the device to spray flammable liquids.

11. 

Do not clean the device with flammable solvents. 

12. 

Take precautionary measures against potential hazards 

from the liquid that need to be sprayed. Follow the 

instructions given by the liquid manufacturer. 

13. 

Do not 

spray any liquid with unknown potential hazard. 

14. 

Forbidden to spray to the hatch of the motor etc. 

B Charger  

Safety Instructions

We pay a great deal of attention to the design of every battery 

pack to ensure that we supply you with batteries that are safe, 

durable and have a high energy density. The battery cells have 

a wide range of safety devices. Each individual cell is initially 

formatted and its electrical characteristic curves are recorded. 

This data is then used exclusively to be able to assemble the 

best possible battery packs.

Despite all the safety precautions, caution must always be 

exercised when handling batteries. The following points must 

be obeyed at all times to ensure safe use. Safe use can only 

be guaranteed if undamaged cells are used. Incorrect handling 

of the battery pack can cause cell damage.

IMPORTANT!

 Analyses confirm that incorrect use and poor 

care of high-performance batteries are the main factors 

responsible for personal and/or product damage.

m

WARNING!

 

Use only approved replacement batteries; 

other batteries may damage the cordless paint sprayer and 

cause it to malfunction, which can lead to personal injury.

m

WARNING!

 Do not use a battery pack or appliance that 

is damaged or modified. Damaged or modified batteries may 

exhibit unpredictable behavior resulting in fire, explosion or 

 

risk of injury.
Do not modify or attempt to repair the appliance or the battery 

pack except as indicated in the instructions for use and care.

Have your battery pack serviced by a qualified repair person

using only identical replacement parts. This will ensure that the

safety of the battery pack is maintained.

m

CAUTION!

 To reduce the risk of injury, charge the

24V iON+ lithium-ion battery pack only in its designated

24V iON+ lithium-ion charger. Other types of chargers present 

risk of fire, personal injury and damage. Do not wire a battery 

pack to a power supply plug or car cigarette lighter. Such 

misuse will permanently disable or damage the battery pack.

• 

Avoid dangerous environments –

 Do not charge the 

battery pack in rain, snow or in damp or wet locations. 

Do not use the battery pack or charger in the presence of 

explosive atmospheres (gaseous fumes, dust or flammable 

materials) because sparks may be generated when inserting 

or removing the battery pack, which could lead to a fire.

• 

Charge in a well-ventilated area – 

Do not block the 

charger vents. Keep them clear to allow for proper 

ventilation. Do not allow smoking or open flames near a 

charging battery pack. Vented gases may explode.

 

NOTE:

 The safe temperature range for the battery is 

 

41°F – 105ºF (5°C – 40.5°C). Do not charge the battery 

outside in freezing weather; charge it at room temperature.

• 

Maintain charger cord –

 When unplugging the charger, pull 

the plug, not the cord, from the receptacle to reduce the 

risk of damage to the electrical plug and cord. Never carry 

Содержание 24V-PS1





















Отзывы: