Powerhouse M46850E.1 Скачать руководство пользователя страница 29

 

29 

Limited Warranty

 

 

Dear Valued Customer: 

 

The Powerhorse Product you just purchased is built with the finest material and craftsmanship.  Use this product properly and enjoy the benefits from 

its high performance.  By purchasing a Powerhorse product, you show a desire for quality and durability.  Like all mechanical equipment this unit 

requires  a  due  amount  of  care.    Treat  this  unit  like  the  high  quality  piece  of  machinery  it  is.    Neglect  and  improper  handling  may  impair  its 

performance.  Please thoroughly read the instructions and understand the operation before using your product.  Always contact Powerhorse Product 

Support at 1-866-443-2576 prior to having any service or warranty work performed, as some services performed by parties other than Powerhorse 

approved service centers may void this warranty.  This warranty is in lieu of any other warranty expressed or implied and Powerhorse assumes no 

other responsibility or liability outside that expressed within this warranty.

 

Limited Warranty 

 

Powerhorse  shall  warranty  any

 

piece  of  equipment  manufactured,  or  parts  of  equipment  manufactured,  to  be  free  from  defects  in  material  or 

workmanship for a period of: 

 

Powerhorse Warranty 
Item # 

Consumer Warranty Period 

Commercial Warranty Period 

46850 

2 years from date of purchase by user 

90 days from date of purchase 

 

 

 

Powerhorse Engine Warranty 
Item # 

Consumer Warranty Period 

Commercial Warranty Period 

46850 

2 years from date of purchase by user 

90 days from date of purchase 

 

“Consumer use” means personal residential household use by a consumer. “Commercial use” means all other uses, including use for commercial, 

income producing or rental purposes or when purchased by a business. 

 

This warranty applies to the original purchaser of the equipment (verification of purchase, in the form of a receipt, is the responsibility of the buyer), is 

non-transferable, and covers parts and labor.  Parts will be replaced or repaired at no charge, except when the equipment has failed due to lack of 

proper maintenance.  If a part is no longer available, the part may be replaced with a similar part of equal function.  Any misuse, abuse, alteration or 

improper installation or operations will void warranty.  Determining whether a part is to be replaced or repaired is the sole decision of Powerhorse.  

Powerhorse will not provide for replacement of complete products due to defective parts.  Any costs incurred due to replacement or repair of items 

outside of a Powerhorse approved facility is the responsibility of the buyer and not covered under warranty. Transportation costs to and from service 

center is the responsibility of the customer.   

 

In addition to the normal warranty, Powerhorse shall warrant any normal wear item from defects in material or workmanship for a period of 90 days 

from the date of purchase by user

.  

Normal wear items include, but are not limited to, belts and filter elements. 

 

This warranty specifically excludes the following; failure of parts due to damage caused by accident, fire, flood, windstorm, acts of God, applications 

not  approved  by  Powerhorse  in  writing,  corrosion  caused  by  chemicals,  use  of  replacement  parts  which  do  not  conform  to  manufacturer’s 

specifications, damage related to rodent and/or insect infestation and damage caused by vandalism.  Additional exclusions: loss of running time, 

inconvenience, loss of income, or loss of use, including any implied warranty of merchantability of fitness for a specific use.  Also, Outdoor Power 

Equipment needs periodic parts and service to perform well, and this warranty does not cover instances when normal use has exhausted the life of a 

component or the engine.   

 

This warranty does not cover any personal injury or damage to surrounding property caused by failure of any part. Repair or replacement of parts 

does not extend the warranty period. 

 

The engine warranty is covered under the same terms and conditions as outlined above. Normal engine maintenance such as spark plugs, air filters, 

adjustments, fuel system cleaning and obstruction due to build up is not covered by this Powerhorse warranty.   

 

Please fill in the following information and have it on hand when you call in on a warranty claim. 

 

 

Customer Number: ______________________________________________________________ 

 

Date of Purchase: _______________________________________________________________ 

 

Powerhorse Serial Number: _______________________________________________________ 

 

Item Number: __________________________________________________________________ 

 
 
 
 
 

Содержание M46850E.1































Отзывы: