1
Owner’s Manual
Operation, Maintenance and Safety Instructions
3" Chipper Shredder
Make sure you completely read and understand this manual before using the chipper/shredder for the
first time. If you have any questions, contact Powerhorse Product Support 1-866-443-2576.
WARNING
READ and UNDERSTAND this manual completely before using the chipper/shredder!
Failure
to properly operate, and maintain this chipper/shredder could result in
serious injury or death
to the
operator or bystanders.
All machines have hazards associated with their operation. This chipper/shredder has certain special
hazards that you must be aware of. As an operator or owner you have a duty to be aware of these
hazards and know preventive measures to avoid them. In particular, be aware of the following:
Keep hands and feet away from inlet and discharge openings.
Do not allow children under the age of 18 or untrained adults to operate.
Wear eye protection and other personal protection against flying debris.
Check that the chipper hood is secured and locked.
Do not attempt to perform adjustments, declog or clean unit while engine is running.
Make sure no children or bystanders are within 100 feet of chipping/shredding operation.
Protect cars, windows and other objects within 100 feet from flying debris.
Be aware of potential for carbon monoxide (CO) poisoning.
Prevent fires/explosions from fueling by using precautions described.
Avoid burns from engine by not touching hot exhaust.
Avoid using in slippery, muddy, wet or icy conditions where falls may occur.
These and other hazards are in this manual and summarized at the end under ―Important Safety
Information.‖
STOP!
ASSEMBLY REQUIRED:
This product requires assembly before use. Some of the components in
this unit are heavy and cannot be lifted by one person safely. Please plan on assembling this product
when another person can be available to help out. See ―Assembly‖ section for instructions.
ADD ENGINE OIL & FUEL:
Engine is shipped without oil.
DO NOT start chipper/shredder without
first adding oil
.
INSPECT COMPONENTS:
Closely inspect to make sure no components are missing or damaged.
See the ―Receiving Your Unit‖ section for instructions on whom to contact to report missing or
damaged parts.
Any Questions, Comments, Problems, or Parts Orders
Call Powerhorse Product Support 1-866-443-2576
MODEL NUMBER: 16620
M16620D
Содержание M16620D
