Powerhorse M1175B, Руководство пользователя

Страница: 59 / 94

59
Assembly Instructions
Step 20 - Fittings

Screw finger-tight (1) Return Line Fitting into the return line filter
head

Wrench-tighten the fitting to 1.5-3.0 turns past “finger tight” position.
Consider final orientation position as to not exceed the recommended
TPFT. Properly assembled fittings total thread engagement should be
3.5-6 turns

CAUTION: Never back off an installed pipe fitting to achieve proper
alignment. Loosening installed pipe fittings will corrupt the seal and
contribute to leakage and failure.

Connect the end of the suction hose to the pump inlet.

Secure the low pressure return hose to return line fitting with supplied
hose clamp installed on hose. Torque to 77 in.-lb.
Tools Needed

Flat Blade Screw
Driver

Crescent Wrench
OR

1 1/16” Wrench
Fasteners Needed from Parts Bag:
Return Line Fitting
Qty: 1
1 3/8” Wrench
Return Line
Filter Head
Return
Line
Fitting
Suction Hose
Hose Clamp
Pump Inlet