Powerhorse M1165E, Руководство пользователя

Страница: 9 / 44

Initial Set-up
9
5. Replace hydraulic oil fill/vent cap.
6. Start engine and use control valve handle to extend and retract wedge five (5) times
to remove air from the high-pressure lines.
7. With wedge retracted, check oil level again. Fill if necessary.
WARNING: NEVER remove the hydraulic oil fill cap when the engine is
running or hot. Hot oil can escape causing severe burns. Allow log splitter to
cool completely before removing hydraulic oil fill cap.
Note: If the log splitter will be run for long periods of time in outdoor temperatures
above 70F, we recommend changing the hydraulic oil to DEXTRON III.
Step Four:
Lubricate Beam Apply grease to beam. This will help prevent wear between the wedge and beam.
Apply grease to beam