Assembly Instructions
38
Step 7
NOTE: Remove the cylinder from the beam/tank
assembly before assembling. The cylinder is
locked in place for shipping purposes in a
backwards orientation.
Orient the Beam/Tank assembly as shown.
Install the Beam/Tank Assembly with the
1/2” x 3” Bolt and 1/2” Class G Flange Nut.
Using a Torque Wrench, tighten bolt to 90
lb-ft.
Step 8
Pivot Beam/Tank Assembly and lock with a
Catch Pin.
Slide Wedge into Beam/Tank Assembly
Keepers.
Lift Cylinder and slide the Cylinder
Trunnion into the Trunnion slots.
Secure wedge to Cylinder with 7/16” x 2-
1/4” Bolt and 7/16” Nyloc Nut.
Using a Torque Wrench, tighten bolt to 60
lb-ft.
Step 9
Install the Log Stripper to the Beam/Tank
Assembly. Use (4) 5/16” x 3/4” Bolt and
5/16” Flange Nuts.
Using a Torque Wrench, tighten all bolts to
20 lb-ft.
Beam/tank
assembly
1/2” Class
G Flange
nut
1/2” x 3”
Bolt
Wedge
Keepers
Catch Pin
7/16” x
2-1/4”
Bolt
Nut
Trunnion
slots
Cylinder
Cylinder Trunnion
Log
Stripper
5/16” x
3/4” Bolt
5/16” Flange
Nuts
Содержание M1165E
