Powerhorse M1156, Руководство пользователя

Страница: 37 / 40

Assembly Instructions
37
Step 12

Attach the Cylinder Hoses to the High
Pressure Fittings.
High-pressure fittings
Long hose
Short hose
Step 13

Connect the Long Low Pressure Hose to the
Hydraulic Tank Assembly and the Control
Valve with the Hose Clamps.

Thread the Pump Suction Fitting into the
Pump.

Connect the Short Low Pressure Hose to the
Hydraulic Tank Assembly and the
Hydraulic Pump with the Hose Clamps.
Step 14

Install the Log Tables to the Beam
Assembly. A soft-faced mallet may be
required.

Secure the Log Tables with the supplied
Cotter Pins.
Step 15

Fill Log Splitter with Hydraulic Fluid as
outlined in the Initial Unpacking & Set-Up
section of the manual.

Fill Engine with SAE 10W-30 as
recommended by the Engine Manufacturer.
Cotter pins
Log tables
Beam assembly
Long hose
Control valve
Tank assembly
Hose clamps
Short hose
Pump
suction
fitting