Powerhorse M1156, Руководство пользователя

Страница: 35 / 40

Assembly Instructions
35
Step 7

Install the Valve Plate to the Beam
Assembly.
 Use 3/8” x 1” Bolts and 3/8” Flange Nut.
Step 8

Install the Hose Barb Elbow to the Control
Valve port marked “Out”. Orient Hose Barb
Down as Shown.

Attach the Control Valve to the Valve Plate.
 Use 1/4” x 1 3/4” Bolts and 1/4” Flange
Nuts
Step 9

Thread the Reducer Fitting into the Control
Valve port marked “IN”.

Thread the High Pressure Elbow into the
Reducer Fitting. Orient the High Pressure
Elbow as shown.

Attach the O-ring side of the Pump Hose to
the Pump.

Attach the loose end to the High Pressure
Elbow.
Valve plate
3/8” x 1” bolts
3/8” flange nuts
Beam assembly
1/4” nuts
1/4” x 1 3/4” bolts
Valve plate
Hose barb elbow
Control valve
Reducer fitting
High Pressure Elbow
Pump hose
Control valve
Pump