Installation / Initial Set-U
p (cont’d)
21
8. Wheel Kit Assembly
Your generator is equipped with a free wheel kit to provide easy portability.
Secure the generator on blocks at least 7" off the ground or work table. Make sure the holes in the base of the
generator are not obstructed to allow for installation of axle and vibration brackets.
Installing the axle
and wheels
1.
Slide (1) Axle into the end of the Wheel (1).
2.
Slide (1) Axle Washer onto the Axle.
3.
Slide the Axle, Wheel, and Washer assembly into the Frame.
4.
Insert (1) Hairpin in the holes on that end of the Axle to secure the Wheel.
5.
Repeat for the opposite Wheel.
Installing the legs
1.
Align (1) Frame Support Assembly to the holes in the generator base. Attach using
(4) M8 X 16 Bolts and (4) M8 Flange Nuts.
2.
Repeat Step 1 to attach the remaining Frame Support Assembly to the generator
base.
Axle
Washer
Wheel
Hairpin
Frame Support Assembly
M8 Flange Nut
Generator Base
M8 x 16mm Flange Bolt
Содержание 750134
Страница 2: ...Hazard Signal Word Definitions 2...
Страница 8: ...Safety Label Locations 8 17 14 1 2 5 3 4 6 7 8 9 10 11 12 16 13 15 18 19...
Страница 48: ...750134 Parts Explosion Rev B 1 48...
Страница 52: ...797263 Engine Parts Explosion Rev B 1 52...