Powerhorse 1577149, Руководство пользователя

Страница: 30 / 52

30
Change Pump Oil
Change the pump oil after the first 50 hours of use,
and then after every 3 months or 500 hours of use after
that.
1. Remove drain plug from pump.
2. Drain pump oil into suitable container and dispose
of responsibly.
3. Reinstall oil drain plug.
4. Make sure unit is sitting level.
5. Reference the “Specifications” section of this
manual to determine the oil type and quantity
needed for your pump model.
6. Replace oil fill cap.
.
*Drain plug not visible in picture.
NOTE TO COMMERCIAL USERS:
All mechanical equipment, no matter how well designed,
will need maintenance and repairs. A Powerhorse
pressure washer is no exception. At times, a
Powerhorse pressure washer may become inoperable
because repairs are required. Powerhorse Product
Support will assist in these repairs as needed, but if an
inoperable pressure washer creates a major expense to
your business, then we strongly recommend the
following:

Have a staff person become familiar with the
mechanical operation of the pressure washer and
capable of making minor repairs and performing all
preventative maintenance procedures.

Keep a stock of recommended service parts for
maintenance and minor repairs.
IMPORTANT: Replacement Parts
If a part needs replacement, only use parts that
meet the manufacturer's part number specifications.
Replacement parts that do not meet specifications
may result in a safety hazard or poor operation of
the pressure washer.
Contact Powerhorse Product Support at
1-866-443-2576 for any
questions, problems, or parts orders.
Breather Plug Tube
with Dipstick
Oil Drain Plug