Besides the output sockets, UPS models
have
also an output terminal block. The connection diagram of this terminal
block is shown in figure below.
The wiring configuration is as the following procedure:
a) Remove the small cover of the terminal block
b) Use AWG14 or 2.1mm
2
wires for wiring configuration
c) Upon completion of the wiring configuration, please check whether
the wires are securely affixed.
d)
Put the small cover back to the rear panel.
Fig.5.1: The output terminal block for
2KS, 3K and 3KT-XL
models
5.2.3 Computer Connection
Connect your computer to the UPS socket outlet using the above diagram.
5.3 Battery Charging
To fully charge the batteries
of the UPS, keep the UPS connected to the mains
supply for 1-2 hours. During this period, the UPS can be used to supply the
load, but in this case the battery autonomy time will be less than the values
specified.
5.4 Turning On the UPS
5.4.1 With Mains Power Connected
Press the "ON" button " " continuously for more than one second, to turn
on the UPS. At the beginning of the turning-on process the UPS performs
Caution!
* Do not connect equipment (such as printers), which may overload the
UPS system.
3KT/3KT-XL
2KT-XL,
