Indicates that the load or the UPS output is short-
circuited and the UPS will shutdown.
Indicates that the load is higher than the UPS output
power rating.
Battery Information
Displays the value of the battery voltage. It can be
displayed from 0 to 999Vdc.
Displays the battery stored capacitance in percent. It can
be displayed from 0 to 199%.
Indicates that the battery is over charged, the UPS will be
switched to battery mode.
Indicates that the battery voltage is low, the UPS will
shutdown soon.
Mode/Fault/Warning code Information
Displays the operating mode, the fault code and the
warning codes of the UPS. For the meaning of these
codes refer to page 13.
Inverter operating Information
Indicates that the inverter is running.
Bypass operating Information
Indicates that the bypass circuit is running.
Output voltage and frequency and Bypass disable/enable selection Information
Indicates the value of the desired UPS output voltage.
One of these four values can be selected when the UPS
is in the No-output or in the Bypass mode.
Indicates the value of the desired UPS output frequency.
One of these two values can be selected when the UPS
is in the No-output or in the Bypass mode.
Indicates if the Bypass circuit is going to be disabled or
enabled. One of these two states can be selected when
the UPS is in the No-output or in the Bypass mode.
