PowerDrive PD100D, Руководство пользователя

Страница: 6 / 11

Type
P
ossible Cause
How do you know if the protection is
available
Solution
Remarks
Current Overload
If the input exceeds
the rated output power 10 to 15%.
Fault indicator
LED will light up and the inverter will automatically
shut off
.
Remove all appli
-
ances and turn off the unit by the ON/ OFF switch. Then
turn on the unit
again. Use smaller power consump
-
tion appliances.
Input Low V
oltage
Input voltage lower
than 10.5V
.
Remove all appli
-
ances and turn off the unit by the ON/OFF switch.
Recharge the
battery
.
Input High V
oltage
Input voltage
higher
than 10.5V
.
Remove all appli
-
ances and turn off the unit by the ON/ OFF switch. Check the battery voltage,
make sure it is within 11-15V
.
Although the invert
-
er has protection against over load, it may still dam
-
age the inverter if the input voltage
exceeds 16V
.
Over T
emperature
The PCB
temperature
is around 230
°F.
Remove all appli
-
ances and turn off the unit by the ON/ OFF switch. Cool down for 15 min
-
utes before turning
on again.
Please ensure
there
is ventilation in the
surrounding
environments.