16
ENGLISH
INSTRUCTION MANUAL
Special safety regulations
•
Do not use the mixer to mix or agitate
materials with an ignition point below 21 °C.
•
Do not lock the on/off button in the on
position.
•
Never turn the mixer on unless the stirrer
attachment fitted is immersed in the material
to be mixed/agitated. Check that the
container holding the material is firmly
positioned on a solid, even surface.
•
Never put your hands, other body parts or
other objects in the container holding the
material while the mixer is running.
•
Do not cover the mixer’s ventilation holes.
•
Do not use the gear selector while the mixer
is running.
•
The mixer is not suitable for permanent
installation.
Selecting a stirrer attachment
The mixer can be used to mix and combine many
different materials, e.g. cement, plaster, paint or
mortar. Check that the stirrer attachment selected
is suitable for the job.
•
Use a stirrer attachment of type
a
for liquid
materials, e.g. paint and light cement mixes.
•
Use a stirrer attachment of type
b
for sticky
materials, e.g. light mortar, putty and glue/
adhesive.
•
Use a stirrer attachment of type
c
for thick
materials, e.g. cement, thick mortar, plaster
and epoxy mortar. (The machine is supplied
with a mortar mixer.)
•
Use a stirrer attachment of type
d
for materials
of low viscosity, e.g. paint and plaster-based
materials.
Use
•
Screw the selected stirrer attachment onto the
spindle (5) using a 24 mm wrench.
•
Select a gear using the gear selector (4). In
the low gear, the rotation speed can be set
anywhere between 0 and 400 rpm. In the high
gear, the maximum speed is 700 rpm.
•
Insert the plug into the mains socket and
switch on the power.
•
Hold the mixer by both handles and lower
the stirrer attachment into the material to
be mixed/agitated.
•
To start the mixer, push and hold the safety
button (2) and press the on/off button (1).
The speed can be controlled using the variable
speed selector (3).
•
Release the on/off button or safety button
to stop the mixer before removing the stirrer
attachment from the container.