PowerBox Systems P2-SERVOBRIDGE, Инструкция по эксплуатации

Страница: 12 / 16

12 PowerBox-Systems − World Leaders in RC Power Supply Systems
5.4 IN CONJUNCTION WITH A FUTABA TRANSMITTER WITH S.BUS2
The S.BUS2 can accommodate up to 31 sensor values (slots). With this system
each P²-ServoBridge transfers four sensor values: current, voltage, capacity and
temperature. Up to seven ServoBridges can be connected directly to the receiver’s
S.BUS2 output using Y-leads.
The USB interface and the Terminal PC program are used to select the slots to be
used, the output channel and the fuse settings.
The P²-ServoBridge is not registered at the transmitter: simply access the sensor
list at the transmitter, and tap on the slot which you have already set for the ServoB-
ridge in Terminal. Select the sensor CURR-1678 for this slot; this sensor occupies
three slots. Immediately after these three slots you should select the temperature
sensor TEMP-1713, which takes up one further slot.
You can use 1, 5, 9, 13, 17, 21 and 25 as starting slots.