PowerBoss Collector 26, Инструкция пользователя / Каталог запчастей

Страница: 7 / 19

7
MACHINE OPERATION
The machine operates with two brooms. The side broom
takes dirt from the side into the reach of the main broom. The
main broom maintains its direction of rotation to throw the
dirt into the hopper in forward direction of the machine. To
use the machine, simply push it at a normal walking speed.
MACHINE OPERATION
In case of normal obstacles coming in the way of sweeping
the machine should be pressed down at the handle. This will
cause the two brooms to lift off from the floor and the
machine can easily surmount these obstacles.
The dirt hopper can be easily lifted by using the handle
provided. The dirt hopper is secured to the machine by
means of the frame. The dirt hopper must be in direct
contact with the broom compartment in order to prevent
leakage of dirt.
The main broom consists of a broom shaft with two broom
core assemblies fastened with six self tapping screws.
The broom cores can be replaced as below:
Ÿ
Unscrew the self tapping screws.
Ÿ
Pull the broom core assembly to the front (broom viewed
from user side) to remove it from the broom shaft.
Overcoming Obstacles
Emptying of Dirt Hopper
Renewal of Broom Assemblies
When reassembly of the broom ensure the split pins
are fixed in the holes to guide the broom.
Rubber Sealing Aprons
The rubber aprons avoid leaking of the dust produced by the
broom. Damaged or used aprons cannot fulfil this task any
longer and must be replaced.
Ÿ
Used for setting of the side broom pressure. The side
broom may touch the floor only by its one third section,
so as to throw the swept matter into the machine.
1. Pressure Adjustment Knob for Side Broom
2. Pressure adjustment knob for Main Broom
3. Knobs
Ÿ
Used to secure the handle to the machine or to
reposition it.
-
+
Indicates the pressure at which the main broom
has been set. Setting must be performed as
described below :
Ÿ
Set the main broom by turning the knob clock-
wise to increase the pressure, at this position
the scale should read ‘5’ .
Ÿ
Starting with this setting, the main broom
pressure can be increased to meet the
requirement. (As the broom wears out)
4. Main Broom Pressure Reading Scale
Ÿ
Turn the knob in counter-clockwise direction to reduce
the main broom pressure according to the requirement.
Excess pressure will cause unnecessary wear of the
broom and increased load for the operator.
Controls
Ÿ
The castor wheel is to keep the pre-set
working height of the side broom.
Ÿ
Used for setting of the main broom
pressure. The pressure must be set so as
to assure perfect cleaning operation.
1
3
2
4