PowerBoss Collector 26, Инструкция пользователя / Каталог запчастей

Страница: 6 / 19

6
Side Broom Assembly
Ÿ
Mount the side broom to the broom plate on the
Ÿ
side arm assembly using Hex Head Bolt and
Ÿ
Nylock nut.
Assembly
For ease of packing, the handle and side broom assembly are
packed separately. These parts must be installed before the
machine is put into operation. The handle is mounted by
means of knobs.
Handle can be fixed in two different positions as shown
below.
This machine is exclusively designed for Dry Sweeping on
Solid, Level and Dry surfaces.
Handle position 1 Handle position 2
FIRST OPERATION
Ÿ
Position the V-Belt from the side arm assembly
Ÿ
around the pulley attached to the backside of the right
wheel. In order to do this it will be necessary to twist the
V-Belt. The lower loop of the v-belt should be coming
from the idler pulley (not from the broom pulley).
Ÿ
Check for proper rotation and operation of the side
broom. The broom should rotate counter clockwise(a)
when the sweeper is pushed forward-if not the V-Belt
was installed incorrectly. If the belt slips the tension can
be adjusted by loosening the 2 screws(b) that attach the
support side broom to the frame, move the bracket
forward, then re-tighten the screws.
Ÿ
Place the V-Belt on to the drive pulley on the wheel,
adjust the arm assembly forwards or backwards for the
desired tension. Fasten the arm assembly by tightening
the screws. Check the broom for free rotation.
FROM IDLER PULLEY
SIDE BROOM ASSY
SUPPORT
SIDE BROOM
MOVE
SCREWS
Ÿ
To attach the side arm assembly to the main frame
remove the two screws that have already been inserted
into the right side of the main frame.
a
b