PowerBoss, Inc. Copyright 2010
PB# 4100039 Rev.* 06/10
Armadillo 9X Series Sweeper
Page 12
TROUBLESHOOTING AND REPAIR
OVERVIEW
This section provides information to assist in
identifying maintenance trouble and provides
possible causes and actions to correct the
problem. The procedures provide service
instructions for your 9X series sweeper. General
service information provides good practices
and for overall servicing the equipment. The
troubleshooting table is organized in the following
sections:
• Diesel Engine
• Hydraulic System
• Vacuum System
Additional troubleshooting information is provides
in the Kubota Diesel Engine Operator and service
Manuals and the GM1.6L Emission Control
Service Manual, refer to these manuals for
engine difficulties.
NOTE: For a preventative maintenance schedule
refer to the 9X Series User Manual
PB# 4100033
GENERAL SERVICE INFORMATION
TRANSPORTING THE MACHINE
Using a Trailer or Transport Vehicle
1. Position the machine on the transport vehicle
or trailer and apply the parking brake.
2. Tie the machine down using the tie down
holes in the frame behind both front wheels
and in the rear center of the frame.
NOTE: Attach the tie downs to the frame only.
Pushing the Machine
Push the machine from the front or rear using the
bumpers only.
ATTENTION!
Do not tow or push the machine a distance of
more than .5 miles (.80 kilometers) or faster
than one mile per hour (1.61 km). Exceeding
these restrictions may cause damage to the
hydraulic system. If towing will exceed the
above restrictions, the rear wheel must be
raised or supported by a dolly.
TROUBLESHOOTING
This section provides information to assist in
identifying maintenance trouble and provides
possible causes and actions to correct the
problem.
TROUBLESHOOTING AND REPAIR
