PowerBoozt Rhino PB 1500LB, Руководство пользователя

Страница: 5 / 46

3
www.powerboozt.com
EN
NOTICE!
•
Do not expose the device to a heat source (such as direct sunlight or heating). Avoid
additional heating of the device in this way.
•
Set up the device in a dry location where it is protected against splashing water.
2.4 Safety when connecting the device electronically
DANGER! Danger of electrocution
•
If you are working on electrical systems, ensure that there is somebody close at hand who
can help you in emergencies.
WARNING!
•
Make sure that the lead has a sufficient cross-section.
•
Lay the cables so that they cannot be damaged by the doors or the bonnet.
•
Crushed cables can lead to serious injury.
CAUTION!
•
Lay the cables so that they cannot be tripped over or damaged.
NOTICE!
•
Use duct-work or cable ducts if it is necessary to lay cables though metal panels or other
panels with sharp edges.
•
Do not lay the 230 V mains cable and the 12 V DC cable in the same duct.
•
Do not lay the cable so that it is loose or heavily kinked.
•
Fasten the cables securely.
•
Do not pull on the cables.
2.5 Operating the device safely
DANGER! Danger of electrocution
•
Do not touch exposed cables with your bare hands.
WARNING!
•
Only use the device in closed, well-ventilated rooms.
CAUTION!
•
Do not operate the device
-
In salty, wet or damp environments
- In the vicinity of corrosive fumes
- In the vicinity of combustible materials
- In areas where there is a danger of explosions.
•
Before starting the device, ensure that the power supply line and the plug are dry.