background image

12

PARAMETERS FOR POWERSPORTS SUBWOOFERS

(Due to Constant Improvements, Specifications and Parameters are subject to change without notice.)

RECOMMENDED ENCLOSURES

Please note that these enclosure volume recommendations are for the internal airspace inside the enclo-
sure and include the displacement of the subwoofer and ports. When choosing your enclosure type, please 
pay close attention to your specific woofer, failing to use the correct enclosure may result in lower power 
handling and poor sound quality. To calculate the internal airspace required, take the internal dimensions of 
the box. First multiple these number by themselves and then divide this sum by 1728. [W x H x D) / 1728]. 
Please contact your authorized PowerBass dealer for other designs and specifications. (Even though these 
subwoofers can be used in a vented enclosure.

XL-1040DSS

XL-1040SS

XL-1240DSS

XL-1240SS

VC Impedance (ohms)

4

Ω

+ 4

Ω

4

Ω

4

Ω

+ 4

Ω

4

Ω

Test Impedance (ohms)

1.65

3.38

1.61

3.39

Fs (Hz)

31.5

28.7

34.3

34.4

SD (sqCM)

363.05

363.05

510.71

510.7

Vas (Ltr)

34.89

40.766

46.09

43.77

Cms (µM/N)

187

219

125

119

Mms (g)

136.6

140.4

172.7

180.3

BL™  

8.546

13.98

8.859

14.91

Qms

7.208

6.603

6.429

6.341

Qes

0.612

0.438

0.763

0.595

Qts

0.564

0.44

0.682

0.544

No (%)

0.171

0.212

0.234

0.288

Spl (dB)

84.5

85.41

85.86

86.75

Xmax (mm) One Way

7.9

7.9

7.9

7.9

Voice Coil Size (inches)

2.0

2.0

2.0

2.0

Frequency Response (Hz)

45 - 500

45 - 500

36 - 500

36 - 500

Magnet Weight

49.09 oz

49.09 oz

57.75 oz

57.75 oz

Mounting Depth (inches)

5.375” (136mm)

5.375” (136mm)

5.875” (148mm)

5.875” (148mm)

Cutoff Diameter (inches)

9.3125” (236.5mm)

9.3125” (236.5mm)

10.9375 (277.5mm)

10.9375 (277.5mm)

Power (RMS/Peak)

200 / 400 watts

200 / 400 watts

250 / 500 watts

250 / 500 watts

Содержание XL PowerSports Series

















Отзывы: