PowerBass ASA 1100.5x, Руководство пользователя

Страница: 13 / 24

LPF (Low Pass Filter) Adjustment
Using this volume, adjust the LPF frequency for your subwoofer speaker(s) operation. The X-OVER switch
position should be at “LPF”.
Remote Port
This is for the optional Remote Gain Control (part# ASA-BASS see your Authorized PowerBass dealer for de-
tails). Plugging in the remote Bass Control overrides the BASS EQ Control on the amplifier side panel.
Fig.8 Low Pass Control (LPF)
40Hz 250Hz
Fig.10 Sub Sonic Adjustment
Fig.9 Input Mode Switch
15Hz 40Hz
INPUT MODE
6 2
4
Sub Sonic Adjustment
The sub sonic control will filter out all frequencies below where the control it is set from going to your
subwoofer(s). This will prevent your subs from playing any low frequencies that may harm the speaker.
Input Mode
The INPUT MODE switch conviniently allows you to select the number of input channels from the source
(head unit) to the amplifier. The designations 2,4, and 6 refer to the number of channels or “pairs” of low
level RCA style inputs (ex: 1pr, 2pr, and 3pr).
This allows you to drive each channel individually for increased performance while at the same time
eliminates the need to use “Y” adaptors.
SPECIAL CONTROLS FOR THE ASA-1100.5
The following instructions apply to the model ASA-1100.5 only. You will not find these controls on any of
the other models in this series.
13