42
Noise emission value:
Noise measurement value determined in accordance with EN 60745.
The A-rated noiselevel of the power tool is typically as follows:
Sound pressure level L
PA
: 81.9dB(A)
Uncertainty k= 3 dB(A)
Sound power level L
WA
: 92.8dB(A)
Uncertainty k= 2.6 dB(A)
Guaranteed sound power level L
WA
: 96dB(A)
The vibration level varies in accordance with the use of the power
tool and may be higher than the value specified in these instructions
in some cases.There is a risk of underestimation of the vibration
load if the power tool is used regularly in this manner. Try to keep the
vibration loads as low as possible. Measures to reduce the vibration
load are, e.g. wearing gloves and limiting the working time. Where in
all states of operation must be included (e. g.times when the power
tool is switched off and times where the power tool is switched on
but running without load).
TECHNICAL DATA
NOTE
The vibration level specified in these instructions has been
measured in accordance with a standardised measuring
procedure specified in EN 60745 and can be used to make
equipment comparisons. The specified vibration emission
value can also be used to make an initial exposure estimate.
Содержание 577174
Страница 33: ...33 Figure 4 Figure 5 Figure 6 Figure 7...
