26
Removing the battery from the product
i. Press the battery pack release button (A) downward.
ii. Pull the battery pack towards the operator, then remove it.
Attention! The battery cannot be charged immediately
after use, it should be left to cool down for a period of time.
The LED lights on the charger switching from green to red,
meaning the battery can be charged.
Switching on/off
NOTE: Hold the chain saw away from yourself using both
hands. Stand in a secure and stable position.
i. Push the safety switch (14) forward and press the on/off switch (13)
to turn the product on.
ii. Release the on/off switch (13) to turn the product off.
Check the oil supply
NOTE! With the chainsaw fully assembled and adjusted
it is important to check the chain oil supply is dispensing
adequate lubrication.
Check the proper functioning of the automatic oiler by running
the Chainsaw. Point the tip of the guide chain bar towards a piece
of cardboard or paper on the ground. If an increasing oil pattern
develops on the cardboard, the automatic oiler is operating fine. If no
oil pattern, despite a full oil reservoir, contact after service agent.
A
13
14
Содержание 577174
Страница 33: ...33 Figure 4 Figure 5 Figure 6 Figure 7...
