PowerBase 577174, Инструкция по эксплуатации

Страница: 29 / 44

29
Brake is engaged and the product can not be
started or run.
Brake is disengaged and the product can be
operated.
CAUTION: NOTE: The motor will not start if the chain brake is
in the engaged position.
CAUTION: NOTE: The motor will not start if the chain brake
is in the engaged position.
Chain brake test
Before cutting with your saw, the chain brake should be tested as
follows:
A. Make sure the chain brake is disengaged.
B. Place the saw on a firm, flat, dry surface that is clear of any
debris. Do not let the saw come in contact with any objects.
C. Instal of the battery pack.
D. Grasp the front handle (not the Chain Brake / Hand Guard Lever)
with your left hand. Thumb and fingers should encircle the
handle.
E.Grasp the rear handle with your right hand .Thumb and fingers
should encircle the handle.
F. Depress the Lock-off button with your right thumb. Squeeze the
trigger with your index finger.
G. While the motor is running, activate the chain brake by rolling
your left hand forward against the lever.
H. Chain and motor should stop abruptly.
WARNING: If the chain and motor fail to stop when the chain
brake is engaged, take the saw to the nearest professional
Service Center. Do not use the saw if the chain brake is not in
proper working order.