18
Fit the shoulder strap
Hook the shoulder strap into the supporting ring on the shaft.
Adjust the length until the shaft is below your right hip.
NOTE: Let the cutting attachment rest lightly on the ground. If
you use a cutting blade, it should balance about 10cm above the
ground to prevent contact with stones and the like. Adjust the
position of the harness clamp to balance the unit correctly.
Installing or removing the battery pack
Hold the tool and the battery pack firmly when installing or
removing the battery pack. Failure to hold the tool and the battery
pack firmly may cause them to slip off your hands and result
in damage to the tool and battery pack, potentially causing a
personal injury.
Always switch off the tool before installing or removing the battery
pack. Always switch off the tool before installing or removing the
battery pack.
To remove the battery pack, press the release button (a), and pull
out. To install the battery pack, align the tongue on the battery
pack with the groove in the housing and slip it into place. Always
insert it all the way until it locks in place with a little click. If not,
it may accidentally fall out of the tool, causing injury to you or
someone around you.
A
