26
3. Remove any remaining cutting line.
4. Place the new cutting line in the center and hang the loop
which has formed into the recess in the spool splitter.
5. Under tension, wind the line onto the spool anti-clockwise. The
spool splitter will separate the two halves of the line.
6. Hook the last 15cm of the two ends of the line onto the
opposite lying line holders of the spool plate.
7. Thread the two ends of the line through the metal eyelets in
the line spool housing.
8. Press the spool plate into the line spool housing.
9. Pull the two line ends sharply to release them from the line
holders.
