22
• Insert the new spool with the smooth side facing upwards in the cutting
head and thread the two lines (18) through the line eyelets. Ensure that
the line ends do not slip out of the spool slots.
• Replace the spool cap (16). Ensure that the retaining tabs of the spool
cap (16) are accurately inserted in the corresponding recesses of the
cutting head.
• Press the line-release button; release it again after pulling the ends
of the cord out a little. Repeat this process until the ends of the cord
project a little beyond the cord cutter.
Alternatively, obtain a 1.6mm nylon string from a specialised dealer and
wind it onto the spool yourself. If you do, take care to use no more than 2
x 5 metres of line; wind it strictly parallel along the two line channels and
against the direction of motor rotation.
NOTE:
The arrow on the protective cover indicates the direction of motor
rotation.
Check the line cutter. Do not use the trimmer without a line or with a
defective line.
Fig. 11
16
17
18
Содержание 577146
Страница 12: ...12 In the Box 1 14 13 12 10 11 9 2 4 5 7 6 3...
