PowerBase 577146, Инструкция по эксплуатации

Страница: 21 / 28

21
Replacing the trimming assembly
Cleaning
Maintenance
WARNING!
Always disconnect the plug from the mains socket
before working on the trimmer.
WARNING!
Any work that is not described in these Instructions
must be carried out by a qualified technician. Only use original parts and
be very careful with the line cutter during installation work. Danger of injury!
Do not spray water onto the trimmer and do not clean it under a flowing
tap. This would result in the danger of an electric shock and the trimmer
could be damaged.
• Always keep the trimmer clean. Do not use cleaning agents and
solvents, as this could damage the plastic housing.
• After the work has been completed, remove all grass and soil from the
cutting device and the protective cover.
• Ensure that the ventilation slots are always clean and free of grass.
• Clean the trimmer with a soft brush or a cloth.
Never manipulate the cutting device by inserting worn out original
or non-approved parts. Only use original spare parts. Never use
metal lines. The use of non-approved parts can result in serious
personal injury and cause irreparable damage to the trimmer, and
the warranty will become void.
Changing the line spool:
• Disconnect the plug from the mains socket.
• Turn over the trimmer so that the cutting head is facing upwards.
• Simultaneously press the two retaining tabs on the side of the cutting
head and remove the spool cap (16) (Fig. 12).
• Remove the line spool (17) from the cutting head (Fig. 12).