.437"
Children can be harmed by small parts,
sharp edges and sharp points in the
vehicle's unassembled state, or by electrical
items. Care should be taken in unpacking
and assembly of the vehicle. Children should
not handle parts, including the battery, or
help in assembly of the vehicle.
WARNING
• Place a .437 cap nut on a flat surface, inside up, as shown.
Hint:
You may want to place a scrap block of wood underneath the
cap nut to protect the assembly surface.
• Fit the rear axle into the cap nut.
• Tap the opposite end of the rear axle with a hammer to secure the
cap nut in the rear axle. Pull on the cap nut to be sure it is secure.
Rear Axle
.437 Cap Nut
• Slide a hubcap
(flat side down)
, a wheel
(flat side down)
and a
driver
(ring side down)
on the rear axle.
• Make sure the ribs on the wheel fit into the grooves in the driver.
Driver
(Ring Side Down)
Groove
Rib
Wheel
(Flat Side Down)
Hubcap
(Flat Side Down)
Rear Axle
(with Cap Nut)
Motor
Motor
Vehicle
Remove
Front Axle
Remove
Front Axle
•
Carefully remove
the front axles from the motors in the vehicle.
Hint:
Keep the motors in place in the vehicle for the next
assembly step.
1
2
3
9
ASSEMBLY
F
H4435pr-0921
FRONT VIEW
