13
F
H4435pr-0921
ASSEMBLY
19
• Position the steering wheel with the large opening
UP
.
• Position the steering column so that the bend is
UP
, as shown.
• Fit the steering column through the center hole in the steering wheel.
End of Steering Column
Steering Wheel
Large Opening
Steering Column
Bend
Upright
Large Opening UP
• Fit a .437 cap nut on the end of the steering column.
• Tap the cap nut with a hammer to attach the cap nut on the steering
column. Pull on the cap nut to be sure it is secure.
Hints:
- You may need the help of another adult to keep these two parts in
the correct position.
- You may want to position the steering column on a scrap block of
wood to protect the assembly surface.
• Fit the steering cap into the center of the steering wheel. Be sure to
align the notch in the steering wheel cap with the tab in the center
of the steering wheel.
• Insert two #8 x 1" screws into the steering wheel cap. Tighten
the screws.
Steering Wheel Cap
Steering Wheel
• Place the dashboard on the top side of the vehicle, as shown.
• Insert five #10 x 1" screws into the dashboard. Tighten the screws.
Dashboard
.437 Cap Nut
16
17
18
.437"
