Adjusting the Brake
10
F
• Turn the lock nut clockwise until it stops against the
brake adjustment knob.
• Turn the brake adjustment knob counter-clockwise until
the lock nut stops against the brake base.
4
Lock Nut
Brake Adjustment
Knob
Brake
Adjustment
Knob
Brake Base
OK
✔
No Gap
Adjust Brake
Gap
• From the front of the handlebar, examine the brake
handle and the brake base.
-
If there is NO gap
between the brake base and the
brake handle, your brake is properly adjusted. Please
proceed to the label decoration section on page 12.
-
If there IS a gap
between the brake base and the
brake handle, your brake
needs to be adjusted
and
tightened. Please go on to step 2 in this section.
1
• Turn the lock nut clockwise a few times to loosen it.
• Turn the brake adjustment knob clockwise a few times to
tighten the brake and close the gap between the brake
base and brake handle.
• When the gap is closed, hold the brake adjustment knob
in position and turn the lock nut counter-clockwise tight
against the brake base to secure the adjustment.
IMPORTANT! Check to be sure the brake is adjusted properly and is tight. Please follow these instructions
carefully before you use this scooter.
OK
✔
No Gap
2
Lock Nut
Brake
Adjustment
Knob
• Now, from the front of the handlebar, examine the brake
handle again.
-
If there is NO gap
between the brake base and the
brake handle your brake is properly adjusted. Please
proceed to the label decoration section on page 12.
- If you cannot eliminate the gap or if the brake
adjustment knob unthreads from the brake base,
proceed to step 4.
Adjust Brake
Gap
3
Turn
Lock Nut
Hold Brake
Adjustment
Knob
Lock Nut