Power Stroke PS907000P Series, Руководство оператора

Страница: 11 / 52

Page 7 — English
SYMBOLS
FUEL WARNING
No smoking when filling with gasoline.
Do not overfill. Full level is 1 in. below the
top of the fuel neck. Stop the engine for
five minutes before refueling to avoid the
heat from the muffler igniting fuel vapors.
ENGINE LUBRICANT WARNING
You must add lubricant before first
operating the generator. Always check
the lubricant level before each opera-
tion. The lubricant level should always
register between the hatched areas on
the dipstick. The unit is equipped with a sensor which will
automatically shut off the engine if the lubricant level falls
below a safe limit.
GROUNDING WARNING
This generator does not include a ground rod
or copper wire. Call a qualified electrician for
local grounding requirements.
CLEARANCE WARNING
While operating and storing, keep at
least 3 feet of clearance on all sides of
this product, including overhead. Allow
a minimum of 30 minutes of “cool down”
time before storage. Heat created by
muffler and exhaust gases could be hot
enough to cause serious burns and/or
ignite combustible objects.
HOT SURFACE WARNING
Do not touch the muffler or aluminum cylinder of the engine.
They are very HOT and will cause severe burns. Don’t put
any flammable or combustible materials in the direct path
of the exhaust.
SPARK ARRESTOR
Operation of this equipment may create sparks that can
start fires around dry vegetation. A spark arrestor may be
required. The operator should contact local fire agencies for
laws or regulations relating to fire prevention requirements.
Product does not include ground rod or copper wire. Call a qualified electrician for local
grounding requirements.
WARNING ADVERTENCIA
940513028-01
This drawing belongs to TTi Group North America. Its contents are confidential and proprietary and shall not be
disclosed to or used by or for outside parties without TTi Group North America’s written consent.
109.7 mm
24 mm
EDITION : A
2013.08.12
OP
940513028-01
Multiple
100%
Total: 2C
Illustrator (PDF)
Refer to Drawings for Dimensions
Special size +/-0.2mm
Black + Pantone 152C
Pantone
152C
Flexcon 21970
with Matte P.P.
or approved alternate
material
Note:
1. Die cut information is noted in blue/cyan color.
2. Maximum allowable Lead content to be 90 PPM max
and Cadmium content to be 100 PPM max per TTI requirement.
3. Label must resist weather, gasoline, and oil per ANSI Z535/UL 969-1991.
Revision Changes:
1.
El producto no incluye el alambre de cobre ni la barra de conexión a tierra. Comuniquese
con un electrista calificado para todo lo relacionado con los requistos de conexión a tierra.
940680040-02
HOT SURFACE
SUPERFICIES CALIENTE
ADVERTENCIA
WARNING
940974090-01
DANGER PELIGRO
Risk of Fire. Keep all objects at least 3 feet away from this machine. Heat from Muffler and Exhaust gases
can ignite combustible objects.
Riesgo de incendio. Mantener todos los objetos a una distancia mínima de 91,4 cm (3 pies) de esta
máquina. El calor de los gases del silenciador y el escape pueden prender fuego a objetos combustibles.