Power Stroke BM907000, Руководство оператора

Страница: 15 / 48

Page 11 — English
UNPACKING
This product requires assembly.

Carefully cut the box down the sides then remove the
machine and any accessories from the box. Make sure
that all items listed in the loose parts list are included.
NOTE
: This machine is heavy and requires a minimum of
two people to lift. To avoid back injury, lift with your legs
and not your back.
WARNING:
Do not use this product if any parts in the Loose Parts List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.

Inspect the unit carefully to make sure no damage oc-
curred during shipping.

Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.

If any parts are damaged or missing, please call
1-800-726-5760 for assistance.
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of this
product with damaged or missing parts could result in
serious personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious per-
sonal injury.
WARNING:
Do not attempt to operate the generator until assembly
is complete. Failure to comply could result in possible
serious personal injury.
LOOSE PARTS LIST
See Figure 2.
The following items are included with the generator:
Key
No.
Description Qty.
1 Small Lock Nut ....................................................2
2 Rubber Foot ........................................................2
3 Small Bolt ............................................................2
4 Wheel ...................................................................2
5
Large Bolt (BM907000) ........................................2
6 Washer (BM907000, BM907000A) ......................2
7 Spacer (BM907000) .............................................2
8 Large Lock Nut (BM907000) ................................2
9 Axle (BM907000A) ...............................................2
10 Hitch Pin (BM907000A) .......................................2
11 Handle Lock Pin ..................................................1
12 Lanyard ................................................................1
13
Engine Lubricant..................................................1
Operator’s Manual (not shown) ...........................1
TOOLS NEEDED
See Figure 3.
The following tools (not included or drawn to scale) are
needed for assembly:

Socket Wrenches and/or Combination Wrenches
NOTE
: Do not put fuel or lubricant in the generator before
installing the feet, frame support, wheels and handle.
INSTALLING FEET ON THE FRAME
See Figure 4.
  Locate the following items:
2 rubber feet
2 small lock nuts
2 small bolts
 Insert bolt through rubber foot and then through frame
as shown.

Thread lock nut onto bolt and tighten one full turn past
snug.
NOTE: be careful not to overtighten so that foot mate-
rial collapses.

Repeat with remaining foot.
ASSEMbLy