9
ASSEMBLY INSTRUCTION
Check for damage to the tool, parts and accessories which may have occurred during transportation. Take
some time to read this manual carefully and understand all the content prior to assembly and operation.
CAUTION!
Always ensure that the tool is switched off and unplugged from the mains supply before
assembly.
The saw blade is not installed on the machine.
Blade Installation
(Fig. 4, 5, 6)
Fig. 4 Fig. 5 Fig. 6
Warning:
Always be sure that the tool is switched off and unplugged before assembly.
Place the saw on its side of a flat surface.
1.
Unplug you saw.
2.
Remove the blade clamp screw (3), the washer and the outer flange.
3.
Lift the lower guard (10) by using the lower guard lever (4).
4.
Clean the saw blade flanges and then mount the saw blade onto the spindle, which is against the inner
flange.
5.
The arrow on the saw blade must match the arrow showing direction of rotation on the guard.
1 laser generator
2 Edge guide locking screw
3
5
7
9
11
13
Blade clamp screw
Unlock button
Laser
Depth setting clamp
Lock lever knob for angle adjustment
Saw blade
4
6
8
10
12
14
Lower guard
Switch trigger
Spindle lock button
Lower guard
Dust extraction nozzle
Baseplate
Содержание PS4405
Страница 2: ...2 ...
Страница 8: ...8 KNOWING YOUR ELECTRIC COMPACT CIRCULAR SAW Fig 1 Fig 2 ...
Страница 14: ...14 EXPLODED VIEW ...