Power Products 6500e, Руководство пользователя

Страница: 21 / 26

16
Figure 15- Removing the air cleaner casing.
Fuel Filter Cup Cleaning
The fuel filter cup is a small well underneath the fuel valve. It helps to trap dirt and water that may be
in your fuel tank before it can enter the engine. To clean the fuel filter cup:
1. Turn the fuel valve to the ¡off¡ position.
2. Unscrew the fuel filter cup from the fuel valve using a wrench. Turn the valve toward you to
unscrew (see figure 16).
3. Clean the cup of all sediment using a rag or brush.
4. Reinstall the fuel filter cup.
Figure 16- Removing the Fuel Filter Cup
Spark Plug Maintenance
The spark plug is important for proper engine operation. A good spark plug should be intact, free of
deposits, and properly gapped. To inspect your spark plug:
1. Pull on the spark plug cap to remove it.
2. Unscrew the spark plug from the generator using the spark plug wrench included with this
product (see figure 17). Visually inspect the spark plug. If it is cracked or chipped, discard and
replace with a new spark plug. Measure the plug gap with a gauge (see figure 18). The gap
should be 0.7-0.8mm (0.028-0.031in.).
3. If you are re-using the spark plug, use a wire brush to clean any dirt from around the spark plug
base and then re-gap the spark plug.
4. Screw the spark plug back into its place on the generator using the spark plug wrench. Replace
the spark plug cap.