Power Products 6500e, Руководство пользователя

Страница: 16 / 26

11
CAUTION- The generator can run at its surge wattage capacity for only a short time.
Connect electrical devices requiring a rated (running) wattage equal to or less than the rated
wattage of the generator. Never connect devices requiring a rated wattage equal to the surge
wattage of the generator.
tool or appliance rated (running) Watts additional surge Watts
electric water heater (40 gal) 4000 0
hot plate 2500 0
saw- radial arm 2000 2000
electric stove 1500 0
saw- circular 1500 1500
air compressor (1 HP) 1500 3000
window air conditioner 1200 1800
saw- miter 1200 1200
microwave 1000 0
well water pump 1000 1000
reciprocating saw 960 1040
sump pump 800 1200
refrigerator freezer 800 1200
furnace blower 800 1300
computer 800 0
electric drill 600 900
television 500 0
deep freezer 500 500
garage door opener 480 0
stereo 400 0
box fan 300 600
clock radio 300 0
security system 180 0
dvd player/ vcr 100 0
common light bulb 75 0
NOTE: The above wattage figures are estimates. Try to check the wattage listed on your electrical
device before consulting this chart.
Figure 8- Estimated wattage requirements of common electrical devices.
Once you have determined what electrical devices you will be powering with the generator, connect
these devices according to the following procedure:
1. Plug in each electrical device with the device turned off. NOTE: Be sure to attach appliances
to the correct receptacle (outlet). Connect standard 120 Volt, single phase, 60 Hz loads only to
the 120 Volt receptacles. Connect 120/240 Volt, single phase, 60Hz loads with a NEMA L14-
30 plug
only to the 120/240 Volt receptacle See Figure 9 for a depiction of each of these
receptacles.
2. Check that the pilot light are lit under the engine switch.
CAUTION: Do not connect 50Hz or 3-phase loads to the generator.