Power Hawk P-16, Руководство по безопасности и инструкция, Страница: 18 / 38

The Power Hawk
®
P-16 Rescue System Instruction Manual Page 16 of 34
2019-09
BC-Li16 BATTERY CHARGER OPERATION
Lithium-Ion battery packs, such as Model
PWR-Li16C supplied by Power Hawk
Technologies, Inc., require special chargers
designed to properly charge the battery and
prevent damage or overcharging conditions.
Only chargers provided by Power Hawk
Technologies, Inc. shall be used to recharge
Power Hawk
® battery packs. The Model BC-
Li16 Battery Charger (right) is designed for
use with the PWR-Li16C battery pack.
Turn charger power “ON” by plugging the power input cord into a suitable 105 to 240 VAC outlet.
Connect the charger to the power pack by aligning the Charger Connector with the mating connector
found on the wire assembly of the power pack. “Snap” the connectors together as shown below.
The BC-Li16 Charger has three (3) LED lights that change color to indicate the status of the
recharge cycle.
RECHARGE TIME: For a fully discharged PWR-Li16C battery pack, the recharge time is approximately
3 hours. A partially discharged battery will take less time.
Charger
Connector
Plug
Removable
Power Input
Cord.
Charger
automatically
switches for
input voltages
between 105
and 240 VAC
Power “On” and
Charge Indicator
Lights
BC-Li16
Battery
Charger
Red = Power On
Yellow (Steady) = Charging
Yellow (Flashing) = Fault
Green = Ready (Fully Charged)