7
Power-Flo Pumps & Systems • 877-24PUMPS • www.powerflopumps.com
Specifications
PFSPCPC50 Series
Submersible Sump Pumps
Features:
General purpose pump for residential, light industrial and commercial
sump applications
DISCHARGE: 1-1/2” NPT Male, Vertical, 1-1/4” with Adapter
LIQUID TEMPERATURE: 32°-77°F
MOTOR HOUSING: Cast Iron.
IMPELLER: Corrosion-resistant, reinforced Thermoplastic
PUMP BASE: Cast Iron.
SHAFT: Stainless Steel
HARDWARE: Stainless steel
GASKET: Rubber
SEAL: Single mechanical, rubber and stainless steel
UPPER BEARING: Single row, ball, oil lubricated
LOWER BEARING: Single row, ball, oil lubricated
POWER CORD: SJTW, 18AWG/3C Cord, with plug.
P/N: 10Ft. - PFL183062, 20Ft. - PFL181061
MOTOR: Energy efficient Permanent Split Capacitor (PSC),
Water Cooled, Class B insulation, Continuous duty (water
depth must be at least 6” to prevent motor from
overheating), Auto reset thermal overload protector,
Circuit requirments 15 AMPS.
LEVEL CONTROL: Vertical, Mechatronic, Normally Open (N/O),
Reinforced thermoplastic, SJTW 18AWG/3C, 10 Ft. OR 20 Ft.
cord w/Piggy-back plug, On point - 8.8”, Off point - 4.4”
P/N: 10Ft. - PFEVS10D1810P1, 20Ft. - PFEVS10D1820P1
WARRANTY: 3 year
MODEL
HP Hz
Volts/Ph
RPM
FL
AMPS
Cord
Length
Wt.
PFSPCPC5030721F10 1/2 60
115/1
3450
4.7
10 ft
21 lbs
PFSPCPC5030721F20 1/2 60
115/1
3450
4.7
20 ft
21.2 lbs
HEAD in Ft
0 Ft
5 Ft
10 Ft 15 Ft 20 Ft 25 Ft Max
Lift
Max
Pressure
FLOW Gallon/Minute
72
65
58
52
42
28
30 Ft 13.2 psi
FLOW Gallon/Hour
4300 3900 3500 3100 2500 1700
PF
TYPE
U, SP, SW
Motor Housing
P, C
Impeller Type
P, C
Suction Plate Type
P, C
Motor HP
25, 33, 50, 75, 1
30
50
Voltage
1 or 2
Float Switch Type
M, F, T
Cord Length
10, 20
Power-Flo U = Utility
SP = Sump Pump
SW = Sewage Pump
P = Plastic
C = Cast Iron
P = Plastic
C = Cast Iron
P = Plastic
C = Cast Iron
25 = 1/4 HP
33 = 1/3 HP
50 = 1/2 HP
75 = 3/4 HP
1 = 1 HP
Shut Off
Head (ft)
Max Flow
(Gal)
1 = 115 V
2 = 230V
M = Manual
F = Fixed Vertical
T = Tethered
10 Ft
20 Ft
EXAMPLE: PFSPCPC3330501T10 - Power-Flo Pumps - Sump Pump - Cast Iron Motor Housing - Plastic Impeller - Cast Iron Suction Plate - 1/3HP - 30” Shut Off Head - 50GPM Max Flow - 115 Volt - Tethered Float - 10’ Cord
Submersible Sump Pump
1-1/2” Discharge,
1/4” Spherical Solids
Vertical Float