3
Power-Flo Pumps & Systems • 877-24PUMPS • www.powerflopumps.com
Specifications
Description
Submersible non-clog sewage pumps are designed for typical raw
sewage application.
Series: PFSE51, PFSE51A,
PFSE51HT, PFSE52, PFSE594,
PFSE544, PFSE554
0.5 HP • 1750 RPM • 60 Hz
Standard & High Temperature
DISCHARGE
2” NPT, Female, Vertical
LIQUID
TEMPERATURE
Standard - 104°F Continuous
High Temp - 200°F Continuous
VOLUTE
Cast Iron, Class 30
MOTOR HOUSING
Cast Iron, Class 30
IMPELLER
2 Vane, Open Type
Material: Cast Iron, Class 30
SHAFT
Stainless Steel
SEAL PLATE
Cast Iron, Class 30
O-RINGS
Buna-N (on Std) Silicon (on High Temp)
HARDWARE
Stainless Steel
PAINT
Powder Coated - Industrial Grade
SEAL
Inboard, Single Mechanical, Oil Filled,
Material: Carbon/Ceramic/Buna-N
POWER CORD
15 Ft. Cord, with Plug on 115 Volt & 1/2HP,
230 Volt 1 Phase. Fast Disconnect Design.
MOTOR
Oil Filled, Squirrel Cage Induction
Class B Insulation
SINGLE PHASE
Permanent Split Capacitor (PSC),
Includes Overload Protection in Motor:
STD Trip Off Temp. 248°F (120° C),
HT Trip Off Temp. 293°F (145° C)
THREE PHASE
200-230/460 is Tri-Voltage motor. Requires
overload protection to be included in control
panel
UPPER BEARING
Single Row, Ball, Oil Lubricated
LOWER BEARING
Single Row, Ball, Oil Lubricated
LEVEL CONTROL
“A”
Wide Angle, Mechanical Float, 15Ft. Cord
with Piggy-Back Plug, Normally Open (N/O).
3.50” tether, Adjustable
Optional 3” Discharge Flange available
Series: PFSE774, PFSE794,
PFSE744, PFSE754
0.75 HP • 1750 RPM • 60 Hz
Series: PFSE1074, PFSE1094,
PFSE1044, PFSE1054
1.0 HP • 1750 RPM • 60 Hz
PFSE .05, .75 & 1HP
Sewage Pumps
PFSE51HT - High Temp
PFSE - Standard Temp
