Power Fist Metal Punch Kit, Руководство пользователя

Страница: 5 / 24

Metal Punch Kit
5
Visit www.princessauto.com for more information
8460131 V 3.01
TOOL USE AND CARE
WARNING! Do not use the tool if the pump action does not function properly. Any tool that cannot be
controlled is dangerous and must be repaired.
WARNING! Do not exceed the maximum 1/8 in. thick mild steel when cutting metal with this tool.
1. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work
of a larger industrial tool. The tool will perform better and more safely at the task for which it
was intended.
2. This tool was designed for a specific function.
Do Not:
a. Modify or alter the tool; all parts and accessories are designed with built-it safety features
that may be compromised if altered.
b. Use the tool in a way for which it was not designed.
3. Maintain tools with care. Keep tools clean and in good condition for a better and safer
performance. Follow instructions for lubricating and changing accessories. Inspect tool fittings
and alignment periodically and, if damaged, have them repaired or replaced by an authorized
technician. The handles must be kept clean, dry and free from oil and grease at all times. A
properly maintained tool reduces the risk of binding and is easier to control. Applying excessive
force can lead to slips and damage to your work piece or personal injury.
4. Only use the lubricants supplied with the tool or specified by the manufacturer. Other lubricants
may not be suitable and may damage the tool or even make the tool explode.
5. When not in use for an extended period, apply a thin coat of lubricant to the steel parts to
avoid rust.
6. Maintain the label and nameplate on the tool. These carry important information. If unreadable
or missing, contact Princess Auto for a replacement.
UNPACKING
1. Carefully remove the tool from the package.
a. Retain packing material until you have carefully inspected and satisfactorily installed or
operated the tool.
2. Make sure that all items in the parts list are included.
3. Inspect the parts carefully to make sure the tool was not damaged while shipping.
WARNING! If any part is missing, do not operate the tool until the missing parts are replaced. Failure
to do so could result in serious personal injury.