V1.0
1/2 in. Electric Impact Wrench
8988404
Visit www.princessauto.com for more information
9
IDENTIFICATION KEY
A
Anvil
B
Forward Trigger
C
Reverse Trigger
D
Power Cord
E.
Carbon Brush Cover
OPERATION
Letter references in parenthesis (A) refer to the included Identification Key.
1.
Press the desired socket (sold separately) onto the anvil (A) until it is
seated firmly.
2.
Connect the power cord (D) to an electrical outlet.
3.
Press the forward trigger (B) to rotate the socket clockwise and the
reverse trigger (C) to rotate the socket counterclockwise. Release the
trigger to stop the rotation.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient, easier
to control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts
when servicing.
3.
Only use accessories intended for use with this tool.
4.
Keep the tool handles clean, dry and free from oil/grease at all times.
5.
Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd.
for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CARBON BRUSHES MAINTENANCE
IMPORTANT! Install the brushes in the proper orientation to reduce wear.
IMPORTANT! New brushes may produce sparks during first use until they
wear and conform to the motor’s armature.