V4.0
1/2 in. dr Electric Impact Wrench
8988404
Visit www.princessauto.com for more information
5
5.
Do not alter any parts of the tool or accessories. All parts and accessories
are designed with built-in safety features that may be compromised
if altered.
6.
Make certain the power source conforms to requirements of your
equipment (see Specifications).
7.
When wiring an electrically driven tool, follow all electrical and safety
codes, as well as the most recent Canadian Electrical Code (CE) and
Canadian Centre for Occupational Health and Safety (CCOHS).
8. This tool is only for use on 120 V (single phase) and is equipped with a
three-prong grounded power supply cord and plug. Check with a qualified
electrician if you are in doubt as to whether the outlet is properly
grounded. If the tool should electronically malfunction or break down,
grounding provides a low resistance path to carry electricity away from
the user.
a.
Never remove the grounding prong or modify the plug in any way, as
this will render the tool unsafe.
b.
Do not use any adapter plugs.
WARNING! All wiring should be performed by a qualified electrician.
POWER CORD
1.
Insert the power cord plug directly to the power supply whenever
possible. Use extension cords or surge protectors only when the tool's
power cord cannot reach a power supply from the work area.
a.
When operating a tool outside, use an outdoor extension cord
marked W-A or W. These cords are rated for outdoor use and reduce
the risk of electric shock.
2.
Do not operate this tool if the power cord is frayed, damaged or poorly
spliced, as an electric shock may occur, resulting in personal injury or
property damage.
a.
Inspect the tool's power cord for cracks, fraying or other faults in the
insulation or plug before each use.
b.
Discontinue use if a power cord feels more than comfortably warm
while operating the tool.
3.
Keep all connections dry and off the ground to reduce the risk of electric
shock. Do not touch the plug with wet hands.
4.
Prevent damage to the power cord by observing the following:
a.
Do not pull on the cord to disconnect the plug from an outlet.