8881039
Air Line Delivery Kit
V1.1
6
For technical questions call 1-800-665-8685
IDENTIFICATION KEY
A 300 ft (90 m) HDPF Aluminum Core
Multilayer Tubing, 1 in. O.D. (1)
B Aluminum Block (4)
C Mounting Clips (25)
D Male Straight Coupling (4)
E Reducing 3/8F*1/4M (3)
F Tubing Cutter (1)
G T-Type Hose Connector (2)
H Quick Coupler (2)
I Brass Plug 3/8 in. (3)
J Shut Off Valve (4)
K Plastic Tube Flaring Tool (1)
ASSEMBLY & INSTALLATION
Letter references in parenthesis (A) refer to the included Identification Key.
Creating the layout for the air delivery system in your workspace will need
to take several factors into account to accommodate air pressure (Delta-P or
ΔP) loss that is inherent in these types of systems.
1.
Arrange the tool stations so tools requiring high pressure/airflow are
closer to the air compressor than tools requiring lower pressure/air flow.
2. Only have the required devices/filters installed in the system. Every
device or filter reduces the air pressure by approximately 7 PSI.
a.
The Delta-P (ΔP) reduction may be marked on the device or filter.
Fig. 1
