V1.0
5/16 in. Straight Grip Air Punch and Flange Tool
8843773
Visit www.princessauto.com for more information
11
HYDRAULIC SYSTEM LUBRICATION
1.
Remove the oil plug (F) with the provided hex key and set aside.
2. Fill the reservoir with hydraulic oil. Be careful not to overfill.
3.
Screw the oil plug back into place and clean any excess oil.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
IMPORTANT! DO NOT pollute the environment by allowing uncontrolled
discharge of waste oil.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Problem(s)
Possible Cause(s)
Suggested Solution(s)
Tool runs at
normal speed,
but loses power
under load.
Motor parts worn.
1.
Have a qualified technician
service the tool.
2. Replace tool or parts.
Tool runs
slowly. Air flows
slightly from
exhaust.
Motor parts jammed with
dirt particles.
OR
Airflow blocked by dirt.
1.
Check air inlet filter for
blockage.
2. Pour air tool lubricating oil
into air inlet as per
lubrication instructions for
clearing shipping grease.
3.
Operate tool in short bursts
to clear debris.
4.
If tool still jammed, clean
tool and lubricate per
lubrication instructions.
