Power Fist 8825119, Руководство пользователя

Страница: 5 / 27

4 Casters
5 Pump
ASSEMBLY INSTRUCTIONS
WARNING
• Use at least two people to lift out of the box.
•
This product arrives almost completely assembled however light assembly
is required.
1. Assemble the Handle
a. Slide the extension tube (37) into the handle slots on the base, and
then connect with M8x20 hex bolt (38).
b. Slide the end of the handle to extension tube, screwing M8x35 hex
bolt (21) and M8 washer
（
23
）
for fixation. (Extension tube was
chosen to increase the handle height.)
2. Install the Foot Pedal
a. Insert the pump lever (20) into the connecting rod (18) and
secure with M8x35 hex bolt (19) and hex nut (4).
BEFORE EACH USE
• Inspect the general condition of the table. Do not use lift table if damaged.
Replace damaged parts before resuming operation.
• Test the cart operation by using the foot pedal and control lever. Make sure
the table raises and lowers properly before adding weight to the table.
• Before raising the table top, lock the casters.