8757783
18V Cordless Tire Inflator
V4.0
8
For technical questions call 1-800-665-8685
IDENTIFICATION KEY
A Vents
B Air hose
C Start Switch
D Self-Locking Switch
E LED light
F
Battery latch
G Battery
H Air chuck
I
Tapered adapter
J
Gauge
K Charger
L Ball adapter
M Hose storage
OPERATION
WARNING! Improperly attached accessories can become detached under
pressure and cause serious injury. Possible air leaks can cause faulty
pressure readings. Make sure all connections are tightly secured.
Letter references in parenthesis (A) refer to the included Identification Key.
Observe the duty cycle during operation to avoid damaging the tool (see
Specifications).
1. Install the battery (G) by aligning the rib on the battery with the grove on
the battery port and pushing forward until the latch (F) clicks.
2. Check the battery power level before each use.
a. The battery is not fully charged out of the carton. Charge the battery
for 6 hours before first use.
3. Position air chuck (H) clamp lever in the upright unlocked position.
Fig. 1
