V4.0
302cc OHV Winter Gas Engine
8717621
Visit www.princessauto.com for more information
5
IDENTIFICATION KEY
A Throttle Control Cable
B Spark Plug
C Muffler
D Primer
E Safety Key
F
Oil Fill Cap
G Fuel Tank and Cap
H Housing
I
Choke
J
Oil Drain Plug
K Recoil
L Starting Handle
M Power Cord Receptacle
N Push Button Electric Start
O Engine Identification (Model – Type – Code)
P Dipstick / Oil Fill
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List. Letter references in parenthesis (A) refer to the
included Identification Key. Dashed numbers in parenthesis (Fig. 1-1) refer to a specific point in an illustration or image.
The engine comes pre-assembled. The engine comes with both an 110V electric start receptacle and a throttle cable. A wiring
diagram is found in Appendix A.
WARNING! All wiring should be performed by a qualified electrician.
OPERATION
WARNING! The manufacturer of the equipment on which this engine is installed specifies the top speed at which
the engine will be operated. Do not exceed this speed.
PRE-OPERATION CHECKS
NOTICE! The engine is not shipped with oil. Before starting the engine, add oil according to the instructions in this
manual. Starting the engine without oil will damage the engine beyond repair.
Check the engine’s condition before operating to maximize the user’s safety and the service life of the engine. Ensure that the
engine is level and the switch is in the OFF position before beginning the pre-operation checks.
GENERAL CONDITION
1. Look around and underneath the engine for signs of oil or gasoline leaks.
2. Remove any excessive dirt or debris, especially around the muffler and recoil starter.
3. Look for signs of damage.
4. Check that all shields and covers are in place.
5. Check that all nuts, bolts and screws are tight.
Fig. 1
