8656860
8 in. Variable Speed Bench Mount Buffer
V4.0
4
For technical questions call 1-800-665-8685
4. Wear protective clothing designed for the work environment and tool.
5. Non-skid footwear is recommended to maintain footing and balance in the
work environment.
6. Wear steel toe footwear or steel toe caps to prevent a foot injury from
falling objects.
7. Wear the appropriate rated dust mask or respirator.
8. This tool can cause hearing damage. Wear hearing protection gear with an
appropriate Noise Reduction Rating to withstand the decibel levels.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1. Do not operate any tool when tired or under the influence of drugs, alcohol
or medications.
2. Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3. Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1. Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for
an unintended purpose.
2. Keep hands and fingers away from the buffing area. Any part of body
coming in contact with moving parts could cause an injury.
3. Never use a tool with a damaged buffing wheel. Change the buffing wheel.
Use only flanges supplied with the buffer.
4. Before using the tool on a workpiece, test the tool by running it at the highest
no-load speed for at least 60 seconds in a safe position. Stop immediately if
there is any abnormal vibration or wobbling that could indicate poor
installation of the buffing wheel. Check the tool to determine the cause.
