8639106
Metal Punch Kit
V4.0
2
For technical questions call 1-800-665-8685
SPECIFICATIONS
Cutting Capacity
Mild steel up to 3.5 mm (10 gauge)
Punch Hole Size (diameter)
22.5 mm
57/64 in.
28.3 mm
1-1/8 in.
34.6 mm
1-23/64 in.
43.2 mm
1-45/64 in.
49.6 mm
1-61/64 in.
61.5 mm
2-27/64 in.
INTRODUCTION
The Metal Punch Kit is used to punch mild steel, aluminum, fiberglass and plastic.
SAFETY
WARNING! Read and understand all instructions before using this tool. The
operator must follow basic precautions to reduce the risk of personal injury
and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and
maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A notice
is an alert that there is a possibility of property damage, injury or death if certain
instructions are not followed.
DANGER! This notice indicates an immediate and specific hazard that
will
result in
severe personal injury or death
if the proper precautions
are not taken.
Metal Punch Kit
