Power Fist 8513533, Руководство пользователя

Страница: 3 / 24

5 HP Open Drip Proof Electric Motor
3
Visit www.princessauto.com for more information
8513533 V 3.03
INTRODUCTION
This fan-cooled motor is perfect for demanding environments and applications requiring a high
starting torque.
FUNCTIONS
The motor has a high starting torque (approx. 250% of full load torque) for applications such as pumps,
compressors, gear boxes and fans. The motor includes manual overload protection and oversized ball
bearings for safety and longevity. The C-Face flange allows for easy mounting of close-coupled pumps,
speed reducers, brackets etc.
SAFETY
WARNING! Read and understand all instructions before using this device. The operator must follow
basic precautions to reduce the risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and
maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A notice is an alert that there is a
possibility of property damage, injury or death if certain instructions are not followed.
DANGER! This notice indicates an immediate and specific hazard that will result in severe personal injury
or death if the proper precautions are not taken.
WARNING! This notice indicates a specific hazard or unsafe practice that could result in severe personal
injury or death if the proper precautions are not taken.
CAUTION! This notice indicates a potentially hazardous situation that may result in minor or moderate
injury if proper practices are not taken.
NOTICE! This notice indicates that a specific hazard or unsafe practice will result in equipment or
property damage, but not personal injury.
WORK AREA
1. Operate in a safe work environment. Keep your work area clean, well lit and free of distractions.
2. Keep anyone not wearing appropriate safety equipment away from the work area.
3. Store devices properly in a safe and dry location. Keep devices out of the reach of children.
4. Do not install or use in the presence of flammable gases or liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the Canadian Standards Association
(CSA) or American National Standards Institute (ANSI).
Personal Protective Equipment
1. Always wear impact safety goggles that provide front and side protection for the eyes.
2. Wear gloves that provide protection based on the work materials or to reduce the effects of
device vibration.
3. Non-skid footwear is recommended to maintain footing and balance in the work environment.
4. Wear protective clothing designed for the work environment and tool.